| Maximum Permissible Speed (limit Speed) |
7013 ACD/P4AH1 |
| Pilot Pressure |
100x65x18 |
| Weight (approx.) |
100 |
| Rotary stiffness |
65 |
| Pressurefree Operation |
18 |
| Flow |
65 mm |
| Nominal Resistance |
100 mm |
| Drive Speed |
18 mm |
| Displacement, geometric, per revolution |
75.8 mm |
| Power |
75.8 mm |
| Maximum Torque |
89.2 mm |
| Maximum Permissible Pilot Pressure |
0.5 mm |
| Control Fluid Drain |
4.9 mm |
| Maximum angular acceleration |
1.1 mm |
| Control Pressure Measurement |
0.6 mm |
| Moment of inertia rotary group |
28.3 mm |
| Load Pressure |
71 mm |
| Maximum Volume Flow |
71 mm |
| Maximum Axial Force At Standstill |
94 mm |
| Sequence Valve |
96.8 mm |
| Case volume |
1 mm |
| Determining Operating Characteristics |
0.6 mm |
| Torque |
78.1 mm |
| Voltage |
39 kN |
| Rate Of Pressure Change |
35.5 kN |
| Drive Power |
1.5 kN |
| Maximum rotational speed |
12000 r/min |
| Limiting speed for oil lubrication |
19000 mm/min |
| Ball - Dw |
11.112 mm |
| Ball - z |
20 |
| Gref |
5.7 cm3 |
| Calculation factor - e |
0.68 |
| Calculation factor - Y2 |
1.41 |
| Calculation factor - Y0 |
0.76 |
| Calculation factor - X2 |
0.67 |
| Calculation factor - Y1 |
0.92 |
| Preload class A - GA |
240 N |
| Preload class B - GB |
480 N |
| Preload class C - GC |
960 N |
| Preload class D - GD |
1920 N |
| Calculation factor - f |
1.13 |
| Calculation factor - f1 |
0.99 |
| Calculation factor - f2A |
1 |
| Calculation factor - f2B |
1.02 |
| Calculation factor - f2C |
1.05 |
| Calculation factor - f2D |
1.08 |
| Calculation factor - fHC |
1 |
| Preload class A |
174 N/micron |
| Preload class B |
227 N/micron |
| Preload class C |
302 N/micron |
| Preload class D |
409 N/micron |
| d1 |
75.8 mm |
| d2 |
75.8 mm |
| D1 |
89.2 mm |
| C1 |
4.9 mm |
| r1,2 min. |
1.1 mm |
| r3,4 min. |
0.6 mm |
| da min. |
71 mm |
| db min. |
71 mm |
| Da max. |
94 mm |
| Db max. |
96.8 mm |
| ra max. |
1 mm |
| rb max. |
0.6 mm |
| dn |
78.1 mm |
| Basic dynamic load rating C |
39 kN |
| Basic static load rating C0 |
35.5 kN |
| Fatigue load limit Pu |
1.5 kN |
| Attainable speed for grease lubrication |
12000 r/min |
| Attainable speed for oil-air lubrication |
19000 r/min |
| Ball diameter Dw |
11.112 mm |
| Number of balls z |
20 |
| Reference grease quantity Gref |
5.7 cm³ |
| Preload class A GA |
240 N |
| Static axial stiffness, preload class A |
174 N/µm |
| Preload class B GB |
480 N |
| Static axial stiffness, preload class B |
227 N/µm |
| Preload class C GC |
960 N |
| Static axial stiffness, preload class C |
302 N/µm |
| Preload class D GD |
1920 N |
| Static axial stiffness, preload class D |
409 N/µm |
| Calculation factor f |
1.13 |
| Calculation factor f1 |
0.99 |
| Calculation factor f2A |
1 |
| Calculation factor f2B |
1.02 |
| Calculation factor f2C |
1.05 |
| Calculation factor f2D |
1.08 |
| Calculation factor fHC |
1 |
| Calculation factor e |
0.68 |
| Calculation factor (single, tandem) Y2 |
0.87 |
| Calculation factor (single, tandem) Y0 |
0.38 |
| Calculation factor (single, tandem) X2 |
0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 |
0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 |
1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 |
0.76 |
| Calculation factor (back-to-back, face-to-face) X2 |
0.67 |
| Mass bearing |
0.43 kg |