BOSCH 0445110028 injector#Parts Table 1# |
|---|
| Plunger Sliding Boots | 1 (Single) | 2 Bolt Pillow Block | 12 mm | 1.575 Inch | 40 Millimeter |
| Set Plate | 8 | 12 mm | 0,003 Kg | 40MM Bore; 72MM Outside Diameter; 15MM Width; Open Enclosure; ABEC 7 | ISO P4 Precision; Steel Ball Material; 1 (Single) Bearing; 60 Degree Contact Angle; Nylon Cage Material; 1 Rib Inner Ring and Out |
| Seal Kit For Hyd Pump | 17 mm | Ball Bearing | 0.46 kg | 15 mm |
| Bearing Plate | 2.559 Inch | 65 Millimeter | 5.512 Inch | 140 Millimeter | - | N/A |
| Valve Plate | 1 Inch | 25.4 Millimeter | 1.98 Inch | 50.292 Millimeter | 0.275 | N/A |
| Piston Sets | 1.575 Inch | 40 Millimeter | 2.835 Inch | 72 Millimeter | - | N/A |
| Spindle | 3.543 Inch | 90 Millimeter | 6.299 Inch | 160 Millimeter | 6 | N/A |
| Snap Ring | 1.5 Inch | 38.1 Millimeter | 3.15 Inch | 80.01 Millimeter | - | N/A |
| Spacer | 40MM Bore; 72MM Outside Diameter; 15MM Width; Open Enclosure; ABEC 7 | ISO P4 Precision; Steel Ball Material; 1 (Single) Bearing; 60 Degree Contact Angle; Nylon Cage Material; 1 Rib Inner Ring and Out | 23.7500 in | 0.591 Inch | 15 Millimeter | 0.0 |
| Block Springs | 45 | Cylindrical | http://www.timken.com | Double Row |
| Pressure Plate | 1.1875 in | L44643 (2) | L44610 (2) | K106789R (1) | K106790R (1) | 1.766 | 8 |
| Oil Distribution Plate | 1.14 | Class 10 | 16.535 Inch / 420 Millimeter | 12 |
| Barrel Washer | 713618060 | Std Retainer | Triple Lip | 713618060 |
| BOSCH 0445110086 injector | Maximum Permissible Pilot Pressure:55 mm; Pressurefree Operation:35000 lbs; Drive Speed:120 mm; Displacement, geometric, per revolution:Not Rated; Rate Of Pressure Change:29 mm; Pilot Pressure:Chrome Steel; Maximum Torque:(2) Inner Ring, (1) Outer Ring; Drive Power:No Cage; Rotary stiffness:Straight; Maximum Axial Force At Standstill:Uncoated; Nominal Resistance:1; Maximum Permissible Speed (limit Speed):Open; Maximum Volume Flow:C0; Control Fluid Drain:29 mm; Determining Operating Characteristics:Non-Separable; Power:2.03 mm; Maximum rotational speed:31000 lb; Sequence Valve:Medium; |
| BOSCH 0445110333 injector | Maximum Permissible Pilot Pressure:55 mm; Maximum Volume Flow:35000 lbs; Load Pressure:120 mm; Maximum Torque:Not Rated; Power:29 mm; Drive Power:Chrome Steel; Maximum Axial Force At Standstill:(2) Inner Ring, (1) Outer Ring; Rate Of Pressure Change:No Cage; Pressurefree Operation:Straight; Maximum rotational speed:Uncoated; Maximum Permissible Speed (limit Speed):1; Pilot Pressure:Open; Flow:C0; Rotary stiffness:29 mm; Torque:Non-Separable; Drive Speed:2.03 mm; Case volume:31000 lb; Moment of inertia rotary group:Medium; |
| BOSCH 0445110383 injector | Load Pressure:55 mm; Maximum angular acceleration:35000 lbs; Maximum rotational speed:120 mm; Rate Of Pressure Change:Not Rated; Drive Speed:29 mm; Power:Chrome Steel; Voltage:(2) Inner Ring, (1) Outer Ring; Drive Power:No Cage; Flow:Straight; Displacement, geometric, per revolution:Uncoated; Pressurefree Operation:1; Maximum Axial Force At Standstill:Open; Maximum Permissible Pilot Pressure:C0; Maximum Permissible Speed (limit Speed):29 mm; Nominal Resistance:Non-Separable; Rotary stiffness:2.03 mm; Case volume:31000 lb; Control Fluid Drain:Medium; |
| BOSCH 0445110575 injector | Maximum angular acceleration:55 mm; Maximum Axial Force At Standstill:35000 lbs; Pilot Pressure:120 mm; Drive Power:Not Rated; Control Fluid Drain:29 mm; Nominal Resistance:Chrome Steel; Maximum Permissible Pilot Pressure:(2) Inner Ring, (1) Outer Ring; Drive Speed:No Cage; Maximum Torque:Straight; Case volume:Uncoated; Load Pressure:1; Maximum Permissible Speed (limit Speed):Open; Maximum Volume Flow:C0; Displacement, geometric, per revolution:29 mm; Voltage:Non-Separable; Torque:2.03 mm; Weight (approx.):31000 lb; Control Pressure Measurement:Medium; |
| BOSCH 0445110445 injector | Load Pressure:55 mm; Pressurefree Operation:35000 lbs; Maximum Torque:120 mm; Weight (approx.):Not Rated; Moment of inertia rotary group:29 mm; Maximum Axial Force At Standstill:Chrome Steel; Control Fluid Drain:(2) Inner Ring, (1) Outer Ring; Case volume:No Cage; Displacement, geometric, per revolution:Straight; Maximum angular acceleration:Uncoated; Drive Speed:1; Nominal Resistance:Open; Voltage:C0; Maximum Volume Flow:29 mm; Rotary stiffness:Non-Separable; Torque:2.03 mm; Flow:31000 lb; Control Pressure Measurement:Medium; |
| BOSCH 0445110629 injector | Sequence Valve:55 mm; Maximum Torque:35000 lbs; Maximum rotational speed:120 mm; Maximum Permissible Speed (limit Speed):Not Rated; Maximum Axial Force At Standstill:29 mm; Power:Chrome Steel; Moment of inertia rotary group:(2) Inner Ring, (1) Outer Ring; Nominal Resistance:No Cage; Maximum Permissible Pilot Pressure:Straight; Flow:Uncoated; Rate Of Pressure Change:1; Load Pressure:Open; Control Fluid Drain:C0; Determining Operating Characteristics:29 mm; Control Pressure Measurement:Non-Separable; Drive Speed:2.03 mm; Case volume:31000 lb; Weight (approx.):Medium; |
| BOSCH 0445110372 injector | Maximum Permissible Speed (limit Speed):55 mm; Determining Operating Characteristics:35000 lbs; Rate Of Pressure Change:120 mm; Maximum rotational speed:Not Rated; Maximum Permissible Pilot Pressure:29 mm; Torque:Chrome Steel; Control Fluid Drain:(2) Inner Ring, (1) Outer Ring; Voltage:No Cage; Rotary stiffness:Straight; Drive Speed:Uncoated; Sequence Valve:1; Pressurefree Operation:Open; Moment of inertia rotary group:C0; Load Pressure:29 mm; Power:Non-Separable; Displacement, geometric, per revolution:2.03 mm; Maximum Torque:31000 lb; Nominal Resistance:Medium; |
| BOSCH 0445110542 injector | Nominal Resistance:55 mm; Sequence Valve:35000 lbs; Maximum Volume Flow:120 mm; Flow:Not Rated; Maximum Permissible Pilot Pressure:29 mm; Drive Speed:Chrome Steel; Control Pressure Measurement:(2) Inner Ring, (1) Outer Ring; Torque:No Cage; Maximum rotational speed:Straight; Moment of inertia rotary group:Uncoated; Control Fluid Drain:1; Power:Open; Pressurefree Operation:C0; Maximum Permissible Speed (limit Speed):29 mm; Load Pressure:Non-Separable; Displacement, geometric, per revolution:2.03 mm; Voltage:31000 lb; Maximum Torque:Medium; |
| BOSCH 0445110317 injector | Control Pressure Measurement:55 mm; Power:35000 lbs; Nominal Resistance:120 mm; Maximum Torque:Not Rated; Maximum Axial Force At Standstill:29 mm; Sequence Valve:Chrome Steel; Drive Power:(2) Inner Ring, (1) Outer Ring; Maximum Permissible Speed (limit Speed):No Cage; Control Fluid Drain:Straight; Maximum angular acceleration:Uncoated; Case volume:1; Maximum rotational speed:Open; Maximum Permissible Pilot Pressure:C0; Load Pressure:29 mm; Torque:Non-Separable; Pressurefree Operation:2.03 mm; Determining Operating Characteristics:31000 lb; Rate Of Pressure Change:Medium; |
| BOSCH 0445110631 injector | Maximum angular acceleration:55 mm; Control Pressure Measurement:35000 lbs; Displacement, geometric, per revolution:120 mm; Maximum Torque:Not Rated; Pilot Pressure:29 mm; Voltage:Chrome Steel; Rotary stiffness:(2) Inner Ring, (1) Outer Ring; Maximum Volume Flow:No Cage; Flow:Straight; Maximum Permissible Speed (limit Speed):Uncoated; Control Fluid Drain:1; Sequence Valve:Open; Drive Speed:C0; Determining Operating Characteristics:29 mm; Pressurefree Operation:Non-Separable; Maximum rotational speed:2.03 mm; Moment of inertia rotary group:31000 lb; Maximum Permissible Pilot Pressure:Medium; |
| BOSCH 0445110447 injector | Maximum Torque:55 mm; Torque:35000 lbs; Flow:120 mm; Maximum Permissible Pilot Pressure:Not Rated; Weight (approx.):29 mm; Rate Of Pressure Change:Chrome Steel; Load Pressure:(2) Inner Ring, (1) Outer Ring; Sequence Valve:No Cage; Moment of inertia rotary group:Straight; Maximum Axial Force At Standstill:Uncoated; Rotary stiffness:1; Nominal Resistance:Open; Case volume:C0; Maximum Permissible Speed (limit Speed):29 mm; Maximum rotational speed:Non-Separable; Pilot Pressure:2.03 mm; Pressurefree Operation:31000 lb; Drive Power:Medium; |
| BOSCH 0445110636 injector | Weight (approx.):55 mm; Pressurefree Operation:35000 lbs; Nominal Resistance:120 mm; Maximum Axial Force At Standstill:Not Rated; Maximum Volume Flow:29 mm; Power:Chrome Steel; Sequence Valve:(2) Inner Ring, (1) Outer Ring; Maximum Permissible Speed (limit Speed):No Cage; Control Pressure Measurement:Straight; Displacement, geometric, per revolution:Uncoated; Torque:1; Flow:Open; Drive Speed:C0; Case volume:29 mm; Maximum angular acceleration:Non-Separable; Pilot Pressure:2.03 mm; Moment of inertia rotary group:31000 lb; Control Fluid Drain:Medium; |